Publications from Research Conducted at NRSF2

The following 75 publications were retrieved from PuSH (Publications of SNS and HFIR)

2017 2 Publications

Eisazadeh H., Bunn J., Aidun D.K., Numerical and Experimental Investigation of Residual Stress Distribution in a Dissimilar Ferritic-Austenitic Weld The Welding Journal, 96, 1, 21-s (2017).
Hempel N., Bunn J., Nitschke-Pagel T., Payzant E.A., Dilger K., Study on the residual stress relaxation in girth-welded steel pipes under bending load using diffraction methods Materials Science and Engineering A: Structural Materials Properties Microst, (2017).

2016 5 Publications

Bagg S.D., Sochalski-Kolbus L.M., Bunn J., The Effect of Laser Scan Strategy on Distortion and Residual Stresses of Arches Made With Selective Laser Melting American Society of Precision Engineering (ASPE) 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing; 27-30 Jun. 2016, Raleigh, NC, M16-5377, (2016).
Cakmak E., Watkins T.R., Bunn J., Cooper R.G., Cornwell P.A., Wang Y., Sochalski-Kolbus L.M., Dehoff R.R., Babu S.S., Mechanical Characterization of an Additively Manufactured Inconel 718 Theta-Shaped Specimen Metallurgical and Materials Transactions A, 47, 2, 971-980 (2016).
Eisazadeh H., Bunn J., Coules H.E., Achuthan A., Goldak J.A., Aidun D.K., A Residual Stress Study in Similar and Dissimilar Welds The Welding Journal, 95, 4, 111-s (2016).
Hempel N., Bunn J., Nitschke-Pagel T., Payzant E.A., Dilger K., Residual Stress Analysis in Girth-welded Ferritic and Austenitic Steel Pipes Using Neutron and X-Ray Diffraction International Conference on Residual Stresses 2016, ICRS-10, 39, (2016).
Yu X., Tzelepis D., Bunn J., Payzant E.A., Feng Z., Tensile Residual Stress Mitigation Using Low Temperature Phase Transformation Filler Wire in Welded Armor Plates International Conference on Residual Stresses 2016, ICRS-10, 78, (2016).

2015 6 Publications

Babu S.S., Love L.J., Dehoff R.R., Peter W.H., Watkins T.R., Pannala S., Additive manufacturing of materials: Opportunities and challenges MRS Bulletin, 40, 12, 1154-1161 (2015).
Brewer L.N., Bennett M.E., Baker B.B., Payzant E.A., Sochalski-Kolbus L.M., Characterization of residual stress as a function of friction stir welding parameters in oxide dispersion strengthened (ODS) steel MA956 Materials Science and Engineering A: Structural Materials Properties Microst, 647, 313-321 (2015).
Sochalski-Kolbus L.M., Payzant E.A., Cornwell P.A., Watkins T.R., Babu S.S., Dehoff R.R., Lorenz M., Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering Metallurgical and Materials Transactions A, 46, 3, 1419-1432 (2015).
Watkins T.R., Cornwell P.A., Dehoff R.R., Nangia V., Godfrey D.G., Residual Stresses in Additively Manufactured Inconel 718 Engine Mount 22nd International Symposium on Air Breathing Engines, Phoenix, Arizona, ISABE 2015, (2015).
Woracek R., Energy selective neutron imaging for the characterization of polycrystalline materials Ph.D. Dissertation, University of Tennessee - Knoxville (2015).

2014 6 Publications

Bennett C., Matamoros A., Barrett-Gonzales R., Rolfe S., Enhancement of welded steel bridge girders susceptible to distortion-induced fatigue The University of Kansas Center for Research, Inc. FHWA-KS-14-03 (2014).
Bunn J., Neutron Diffraction Study of Engineering Materials Subjected to Complex Loadings Ph.D. Dissertation, University of Tennessee - Knoxville (2014).
Bunn J., Penumadu D., Lou X., Hubbard C., Effect of multi-axial loading on residual strain tensor for 12L14 steel alloy Metallurgical and Materials Transactions A, 45, 9, 3806-3813 (2014).
England R.D., Phase Equilibria of Fe-C Binary Alloys in a Magnetic Field Ph.D. Dissertation, Florida State University (2014).
Maziasz P.J., Wilson M., CRADA Final Report for CRADA Number NFE-08-01671 Materials for Advanced Turbocharger Designs Oak Ridge National Laboratory ORNL/TM-2014/632 (2014).
Simmons G.G., Fatigue Enhancement of Undersized, Drilled Crack-Arrest Holes Ph.D. Dissertation, University of Kansas (2014).

2013 4 Publications

Davis P.B., Schutte C.L., Gibbs J.L., 2012 Annual Progress Report: Propulsion Materials Vehicle Technologies Office Oak Ridge National Laboratory ORNL/TM-2012/571 (2013).
Hubbard C., Bunn J., Woracek R., Penumadu D., Cornwell P.A., In situ neutron diffraction measurements of the shear moduli Ghkl for 12L14 Steel Materials Science and Technology (MS&T), (2013).
Johnson E.M., Progress toward a model based approach to the robust design of welded structures Ph.D. Dissertation, Iowa State University (2013).
Watkins T.R., Bilheux H.Z., An K., Payzant E.A., Dehoff R.R., Duty C.E., Peter W.H., Blue C.A., Brice C.A., Neutron characterization for additive manufacturing Advanced Materials & Processes, 171, 3, 23-27 (2013).

2012 11 Publications

Aristizabal R.E., Intercritical heat treatments in ductile iron and steel Ph.D. Dissertation, University of Alabama at Birmingham, The (2012).
Cornwell P.A., Bunn J., Schmidlin J.E., Hubbard C., Laboratory guide for residual stress sample alignment and experimental planning - October 2011 version Oak Ridge National Laboratory, Oak Ridge, TN ORNL/TM-2011/460 (2012).
Druschitz A., Aristizabal R.E., Druschitz E., Hubbard C., Watkins T.R., Walker L., Ostrander M., In situ studies of intercritically austempered ductile iron using neutron diffraction Metallurgical and Materials Transactions A, 43, 5, 1468-1476 (2012).
Florea R.S., Experiments and simulation for 6061-T6 aluminum alloy resistance spot welded lap joints Ph.D. Dissertation, Mississippi State University (2012).
Florea R.S., Hubbard C., Solanki K.N., Bammann D.J., Whittington W., Marin E.B., Quantifying residual stresses in resistance spot welding of 6061-T6 aluminum alloy sheets via neutron diffraction measurements Journal of Materials Processing Technology, 212, 11, 2358-2370 (2012).
Johnson E.M., Watkins T.R., Schmidlin J.E., Dutler S.A., A benchmark study on casting residual stress Metallurgical and Materials Transactions A, 43, 5, 1487-1496 (2012).
Solanki K.N., Jordon J.B., Whittington W., Rao H., Hubbard C., Structure-property relationships and residual stress quantification of a friction stir spot welded magnesium alloy Scripta Materialia, 66, 10, 797-800 (2012).
Taylor D.J., Watkins T.R., Hubbard C., Hill M.R., Meith W.A., Residual stress measurements of explosively clad cylindrical pressure vessels Journal of Pressure Vessel Technology, 134, 1, 11501 (2012).
Woo W.C., Em V., Lee H.J., Seong B.S., Park K.S., Byeon J.G., Hubbard C., Residual stress measurements through the thickness of the dissimilar weld pipe using neutron diffraction ASME 2011 Pressure Vessels and Piping Conference, (2012).
Woracek R., Bunn J., Penumadu D., Hubbard C., Method to determine hkl strains and shear moduli under torsion using neutron diffraction Applied Physics Letters, 100, 191904 (2012).

2011 14 Publications

Aristizabal R.E., Druschitz A., Druschitz E., Bragg R., Hubbard C., Watkins T.R., Ostrander M., Intercritically austempered ductile irons Transactions of the American Foundry Society, 119, 407-412 (2011).
Druschitz A., Aristizabal R.E., Ricardo E., Druschitz E., Hubbard C., Watkins T.R., Neutron diffraction studies of intercritically austempered ductile irons SAE International Journal of Materials and Manufacturing, 4, 1, 111-118 (2011).
Dutler S.A., Johnson E.M., Watkins T.R., Schmidlin J.E., Validation of residual stress simulation in optimized stress lattice 11-079 2011 Proceedings of the 115th Metalcasting Congress, (2011).
Hubbard C., Neutron diffraction residual stress measurements within the phase III nozzle S-3 Oak Ridge National Laboratory ORNL/TM-2011/191 (2011).
Hubbard C., Neutron diffraction residual strain tensor measurements within the phase IA weld mock-up plate P-5 Oak Ridge National Laboratory ORNL/TM-2011/304 (2011).
Polvino S.M., Accuracy, precision, and resolution of strain measurements on diffraction instruments Ph.D. Dissertation, Columbia University (2011).
Sediako D., D'Elia F., Lombardi A., Machin A., Ravindran C., Hubbard C., Mackay R., Application of neutron diffraction in analysis of residual stress profiles in the cylinder web region of an as-cast V6 Al engine block with cast-in Fe liners Materials Fabrication, Properties, Characterization, and Modeling, (2011).
Woo W.C., Em V., Hubbard C., Lee H.J., Park K.S., Residual stress determination in a dissimilar weld overlay pipe by neutron diffraction Materials Science and Engineering A: Structural Materials Properties Microst, 528, 27, 8021-8027 (2011).
Zhang W., Feng Z., Crooker P., Improved procedure for computing residual stresses from neutron diffraction data and its application to multipass dissimilar welds Science and Technology of Welding and Joining, 16, 3, 254-260 (2011).

2010 6 Publications

Bunn J., Penumadu D., Hubbard C., Residual strain evolution in steel samples: tension versus torsion Applied Physics A: Materials science & Processing, 99, 3, 517-578 (2010).
Hubbard C., Residual stress analysis for industry using neutron scattering at Oak Ridge National Laboratory 55, 2, BAPS.2010.MAR.V5.3 Bulletin of the American Physical Society, APS March Meeting 2010, (2010).
Lee S.Y., Sun Y., An K., Choo H., Hubbard C., Liaw P.K., Evolution of residual-strain distribution through an overload-induced retardation period during fatigue-crack growth Journal of Applied Physics, 107, 2, 23517 (2010).
Leist T., Webber K.G., Jo W., Aulbach E., Rodel J., Prewitt A.D., Jones J.L., Schmidlin J.E., Hubbard C., Stress-induced structural changes in La-doped BiFeO3-PbTiO3 high-temperature piezoceramics, Acta Materialia, 58, 18, 5962-5971 (2010).
Pramanick A., Prewitt A.D., Cottrell M.A., Lee W., Studer A.J., An K., Hubbard C., Jones J.L., In situ neutron diffraction studies of a commercial, soft lead zirconate titanate ceramic: Response to electric fields and mechanical stress Applied Physics A: Materials science & Processing, 99, 3, 557-564 (2010).
Ritter A., Kuhr B., Hubbard C., Watkins T.R., Boehlert C., Niu X., Effects of shot peening aluminum alloy A356.2 cast plate with steel TMS 2010 Annual Meeting in Seattle, Washington, (2010).

2009 9 Publications

An K., Bailey W.B., Craig S.O., Choo H., Hubbard C., Erdman D., NRSF2 load frame: design, control, and testing Journal of Neutron Research, 15, 3-4, 207-213 (2009).
Cheng P., Influence of residual stress and heat affected zone on fatigue failure of welded pipe joints Ph.D. Dissertation, North Carolina State University (2009).
Lee S.Y., Effects of overload and underload on internal strains/stresses and crack closure during fatigue-crack propagation Ph.D. Dissertation, University of Tennessee - Knoxville (2009).
LeMaster R.A., Boggs B.L., Bunn J., Hubbard C., Watkins T.R., Grinding Induced Changes in Residual Stresses of Carburized Gears Gear Technology, 42-49 (2009).
LeMaster R.A., Boggs B.L., Bunn J., Kolwyck J.V., In-situ measurement of stresses in carburized gears via neutron diffraction Gear Technology, 26, 3, 38-43 (2009).
Penumadu D., Dutta A.K., Luo X., Thomas K.G., Nano and neutron science applications for geomechanics KSCE Journal of Civil Engineering, 13, 4, 233-242 (2009).
Qu J., Xu H.B., Feng Z., An K., Battiste R., An L., Heinrich H., Forming Al-Al2O3 nanocomposite surfaces using friction stir processing Transactions of NAMRI/SME, 37, 349-356 (2009).
Woo W.C., Feng Z., Wang X.L., Hubbard C., Neutron diffraction measurements of time-dependent residual stresses generated by severe thermomechanical deformation Scripta Materialia, 61, 624-627 (2009).
Xu H.B., Hubbard C., An K., Feng Z., Wang X.L., Qu J., Neutron diffraction measurement of residual stresses in friction stir processed nanocomposite surface layer Advanced Engineering Materials, 11, 650-653 (2009).

2008 6 Publications

Chakoumakos B.C., Fernandez-Baca J.A., Garlea V.O., Hubbard C., Wang X.L., Diffraction at the HFIR Neutron News, 19, 2, 14-17 (2008).
LeMaster R.A., Hubbard C., In-situ measurement of stresses in carburized gears via neutron diffraction Oak Ridge National Laboratory ORNL /TM-2007/ (2008).
Pratt P.R., Felicelli S.D., Wang L., Hubbard C., Residual stress measurement of laser-engineered net shaping AISI 410 thin plates using neutron diffraction Metallurgical and Materials Transactions A, 39, 13, 3155-3163 (2008).
Wang J., Lara-Curzio E., King T., An K., Hubbard C., Effective lifetime estimate of crimped powerline splice connector operated at high temperature 2008 ASME PVP Conference, (2008).
Wang J., Lara-Curzio E., King T., Graziano J.A., Chan J.K., The integrity of ACSR full tension splice connector at higher operation temperature IEEE Transactions on Power Delivery, 23, 2, 1158-1165 (2008).
Wang L., Felicelli S.D., Pratt P.R., Residual stresses in LENS-deposited AISI 410 stainless steel plates Materials Science and Engineering A: Structural Materials Properties Microst, 496, 234-241 (2008).

2007 2 Publications

Luo X., Study on infrastructure materials using neutron radiography and diffraction Ph.D. Dissertation, University of Tennessee - Knoxville (2007).
Sun Y., The study of crack closure phenomenon following one tensile overload Ph.D. Dissertation, University of Tennessee - Knoxville (2007).

2006 4 Publications

Tang F., Hubbard C., Sarma G., Keiser J., Residual strain distribution in bent composite boiler tubes Materials Science and Engineering A: Structural Materials Properties Microst, 437, 1, 83–87 (2006).
Woo W., Choo H., Brown D.W., Feng Z., Liaw P.K., David S.A., Hubbard C., Bourke M.A., Effect of Heat and Plastic Deformation on the Texture of a Friction Stir Processed 6061-T6 Aluminum Alloy: A Neutron Diffraction Study 7th International Conference on Trends in Welding Research, May 16-20, 2005, Pine Mountain Georgia, (2006).
Woo W., Feng Z., Wang X.L., An K., Bailey W.B., David S.A., Hubbard C., Choo H., Feasibility of thermal strain measurements during quasi-steady state using neutron diffraction Residual Stresses Vii Volume 524-525 Trans Tech Publications Ltd (2006).
Woo W., Feng Z., Wang X.L., An K., Hubbard C., David S.A., Choo H., In situ neutron diffraction measurement of transient temperature and stress fields in a thin plate Applied Physics Letters, 88, 26, 261903 (2006).