MANDI Sample Environment
MANDI Sample Mounting Guidelines (Capillaries):
- Mount the sample within the region of the capillary as specified below.
- Be sure that the sample is secure in that region.
- The mother solution should be in the other side of the capillary that is far away from the mounting end.
- Be sure that the wax diameter is smaller than 6mm.
- Capillaries should not be longer than 50mm and the outer diameter should not be any larger than 4.0 mm.
- DO NOT use borosilicate capillaries. Quartz is preferred.
MANDI Cryogenic Sample Mounting Guidelines (pins):
- The standard crystal cap magnetic is from Hampton Research. The height, that is from the bottom of the base to the top of the pin, should be 23-27.5mm.